Quick Details
Steel Grade: 65mn 60si2mna 55crsi(SAE9254V) 50crva
Standard: AISI, ASTM, BS, DIN, JIS
Wire Gauge: 0.5mm-10mm
Place of Origin: Henan, China (Mainland)
Application: Manufacturing
Alloy Or Not: Is Alloy
Special Use: Cold Heading Steel
Model Number: 65mn 60si2mna 55crsi(SAE9254V) 50crva
Brand Name: Henan Friend
Product name: super supplier of high carbon spring steel wire
Key word: Compression spring flat spring steel wire
Surface: bright
Material: 65mn 60si2mna 55crsi(SAE9254V) 50crva
Tensile strength: 1340mpa-2230mpa
Usage: Torsion Springs Compression spring
Certificate: ISO 9001:2008
Package: in coil
Diameter: 0.5mm-10mm
Item name: spring wire
Packaging & Delivery
Packaging Details: oil-quenching spring steel wire Packing in coil with net weight 100-800kg/coil
Delivery Detail: Shipped in 5 days after payment
First, the product brief:
65mn60si2mna55crsi(SAE9254V)50crva spring steel wire
The material strength, elastic limit, yield ratio, hardenability and anti-tempering stability, and is widely used, and some used in some of the higher stress in the fatigue (high tensile strength, high strength, high tensile strength, high tensile strength, Performance of the work of important spring and wear serious spring, such as spring rings, shock absorber springs and brake springs, cars, locomotives, tractor coil spring, cylinder safety valve spring and some mechanical wear rods and so on.
Henan friend Tak Metal Products Company Limited
OLD TEMPEREO CARBON STEEL SPRING WIRE
Adapted to the general purpose spring, brake spring, in the upscale automobile clutch spring, shock absorber screw spring, belt tensioner pulley spring and manufacture of engine valve spring steel wire
Classification, designation and wire diameter range
Classified |
Static |
Fatigue |
High fatigue |
|
Tensile strength |
Low strength |
FDC |
TDC |
VDC |
In strength |
FDCrV(A、B)FDSiMn |
TDCrV(A、B) TDSiMn |
VDCrV(A、B) |
|
High strength |
FDCrSi |
TDCrSi |
VDCrSi |
|
Diameter range |
0.5mm~17.0mm |
0.5mm~17.0mm |
0.5mm~17.0mm |
0.5mm~10.0mm |
Note 1:Static level steel suitable for general use spring, expressed in FD。 |
Wire codes and steel grades corresponding relationship
Wire code | Commonly used representative brands |
FDC、TDC、VDC |
65、70、65Mn |
FDCrV-A、TDCrV-A、VDCrV-A |
50CrA |
FDSiMn、TDSiMn |
60Si2Mn、60Si2MnA |
FDCrSi 、TDCrSi 、VDCrSi |
55CrSi、SAE9254V |
FDCrV-B、TDCrV-B、VDCrV-B |
67CrV |
Wire diameter range
Note: The roundness is not greater than half the size of the allowable deviation
Wire surface inspection
The surface of the steel wire shall be smooth and shall not have any defects such as scratching, rusting, folding or knotting which may adversely affect the use of steel wire. The maximum depth shall not exceed the depth specified in the table below.
Degree of defects. VD grade, TD grade steel wire shall not have full decarburization, but allow not more than d1.0% of the semi-decarburization.
Maximum Depth Allowable for Surface Defects
Heat treatment
Spring, the spring should be tempered between 380 ℃ ~ 420 ℃ treatment to reduce surface stress, shot blasting should be 250 ℃ hot pressure or eliminate the stress treatment.
delivery status
The wire is delivered in coil form
Oil quenched - Tempered spring steel wire
Suitable for general purpose springs, brake brakes springs, middle and high grade automobile clutch springs, shock absorber coil springs, belt tensioner springs and steel wire for manufacturing engine valve springs.
Mechanical properties
Static level, in the fatigue class mechanical properties table (the same disk strength of not more than 50MPa)
High fatigue level mechanical properties table (with the disc strength is not greater than 40MPa)
The grades of spring steel is introduced
1、65#、70#
Can get very high strength, hardness, yield ratio, but the hardenability of small, heat resistance is not good, bear the load and fatigue load capacity is low is widely used, but more for low working temperature of small springs or less important big spring.Such as automobile, tractors, railway vehicles and the general use of the machinery spring
2、65Mn
Composition is simple, the hardenability and mechanical properties, and process performance than carbon steel, low price, large amount of.Applicable to the manufacture of a variety of small cross section flat spring, spring, spring, or making ring spring, damper and a clutch spring, brake spring.
3、60Si2MnA
High strength, good elasticity; resistance to tempering stability; a main spring steel, uses a very wide.Suitable for manufacturing all kinds of springs, such as automobiles, locomotives, tractors, spring spiral spring, cylinder safety valve spring and some under high stress work important spring, serious abrasion of the spring.
4、50CrVA
Because of containing a small amount of vanadium can improve flexibility, strength, yield ratio and sag resistance, grain refinement, reducing decarbonization tendency.Carbon content are smaller, plasticity, toughness good than other spring steel.Hardenability high, fatigue or applicable to various important helical spring, in particular is suitable to high job stress amplitude, fatigue properties require strict spring, such as valve, spring, spring nozzle cylinder ring, a safety valve spring
5、55SiCrA SAE9254 SAE9254V
High tensile strength and yield strength, and good processing performance, can withstand higher stress load, mainly used for turbine steam seal spring, engine valve spring, valve spring, a regulating spring, a condenser support spring
Heat treatment
Spring, spring should be at 380 ℃ ~420 ℃ tempering treatment,
In order to reduce the surface stress, shot blasting should be at 250 ℃ heat
Pressure or stress relieving treatment
Delivery condition
Wire coil in order to delivery
FAQ:
Q: Are you trading company or manufacturer?
A: We are factory.welcome? To? Visit? Our? Factory? At? Any time.
Q: How long is your delivery time?
A: Generally it is 10-15 days as customer requirements.
Q: Do you provide samples? Is it free or extra?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment?
A: TT payment or LC terms
Fourth, after-sales service
24-hour professional to provide technical support,
MSN: cnfuruide@hotmail.com
Email: cnfuruide@gmail.com
Cnfuruide@hotmail.com
Tel: 86-373-3686581
Fax: 86-373-3686583
Http://www.cnfuruide.com
Http://www.hnfuruide.com
With wide experience and expertise, Friend Metal is engaged in the developing, manufacturing and marketing of cold-drawn alloy spring steel wire 65mn 60si2mna 55crsi sae9254v 50crva ASTM-A230-99, ASTM-A401, EN10270-2, JIS G3561. As a professional manufacturer, we now brings you high quality various steel wires made in China which comes in high strength, well toughness and excellent wearing resistance. We also welcome your customized orders.